| Model | Capacity in pair (t) | Grip opening (mm) | B (mm) | C (mm) | D (mm) | E (mm) | Net weight (kg) | Add to Enquiry |
| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| HPC1,5T | 1,5 | 0-50 | 210 | 130 | 100 | 30 | 4,3 | Add + |
| HPC3,0T | 3,0 | 0-50 | 236 | 203 | 110 | 36 | 6,0 | Add + |
| HPC5,0T | 5,0 | 0-60 | 273 | 251 | 130 | 40 | 12,0 | Add + |
| HPC9,0T | 9,0 | 0-100 | 380 | 290 | 165 | 40 | 28,4 | Add + |
Horizontal plate clamp type HPC RX-lift
• EN 13155
• horizontal lifting and transport of sheets and steel plates
• use in pairs, multiple pairs or in “tripod” configuration in combination with 2-leg or 3-leg slings and suitable shackles
• it is prohibited to use in combination with 4-leg sling (when lifting long plates, use spreader beam with combination with 1-leg or 2-leg slings)
• for material with max. surface hardness 30 HRC
• temperature of use from -40 to 100°C
• lateral angle during lifting must not exceed angle of 15°
• rate capacity is calculated on basis of the top angle of 0-30° (for angels 30-60° between clamp and sling, clam capacity is decreased)
• EN 13155
• horizontal lifting and transport of sheets and steel plates
• use in pairs, multiple pairs or in “tripod” configuration in combination with 2-leg or 3-leg slings and suitable shackles
• it is prohibited to use in combination with 4-leg sling (when lifting long plates, use spreader beam with combination with 1-leg or 2-leg slings)
• for material with max. surface hardness 30 HRC
• temperature of use from -40 to 100°C
• lateral angle during lifting must not exceed angle of 15°
• rate capacity is calculated on basis of the top angle of 0-30° (for angels 30-60° between clamp and sling, clam capacity is decreased)