| Model | Capacity in pair (t) | Grip opening (mm) | A (mm) | B (mm) | C (mm) | D (mm) | Net weight (kg) | Add to Enquiry |
| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| PPD0,8T | 0,8 | 0-25 | 22 | 125 | 165 | 40 | 2,5 | Add + |
| PPD1,0T | 1,0 | 0-30 | 25 | 148 | 205 | 40 | 3,5 | Add + |
| PPD1,6T | 1,6 | 0-30 | 30 | 148 | 205 | 45 | 4,0 | Add + |
| PPD2,0T | 2,0 | 0-40 | 30 | 172 | 245 | 47 | 5,0 | Add + |
| PPD3,0T | 3,0 | 0-45 | 30 | 180 | 245 | 50 | 6,0 | Add + |
| PPD4,0T | 4,0 | 0-50 | 30 | 170 | 260 | 52 | 6,5 | Add + |
| PPD5,0T | 5,0 | 0-55 | 30 | 180 | 260 | 56 | 7,5 | Add + |
| PPD6,0T | 6,0 | 0-65 | 37 | 210 | 308 | 62 | 10,5 | Add + |
| PPD6,0BT | 6,0 | 0-130 | 37 | 316 | 310 | 62 | 22 | Add + |
| PPD8,0T | 8,0 | 0-100 | 55 | 282 | 400 | 65 | 22 | Add + |
| PPD10,0T | 10,0 | 0-125 | 55 | 325 | 500 | 75 | 33 | Add + |
Horizontal plate clamp type PPD RX-lift
• EN 13155
• horizontal lifting and transport of sheets and steel plates and constructions
• the clamp contains a safety lock mechanism that ensures that the load does not slip when is being lowered
• it is prohibited to use in combination with 2-leg, 3-leg or 4-leg sling (when lifting it is mandatory to use spreader beam with combination with 1-leg slings)
• for material with max. surface hardness 30 HRC
• temperature of use from -40 to 100°C
• lateral angle during lifting must not exceed angle of 15°
• rate capacity is calculated on basis of the top angle of 0-30° (for angels 30-60° between clamp and sling, clam capacity is decreased)
• EN 13155
• horizontal lifting and transport of sheets and steel plates and constructions
• the clamp contains a safety lock mechanism that ensures that the load does not slip when is being lowered
• it is prohibited to use in combination with 2-leg, 3-leg or 4-leg sling (when lifting it is mandatory to use spreader beam with combination with 1-leg slings)
• for material with max. surface hardness 30 HRC
• temperature of use from -40 to 100°C
• lateral angle during lifting must not exceed angle of 15°
• rate capacity is calculated on basis of the top angle of 0-30° (for angels 30-60° between clamp and sling, clam capacity is decreased)