| Capacity in pair (t) | Grip opening (mm) | V (mm) | T (mm) | U (mm) | X (mm) | Net weight (kg) | Add to Enquiry |
| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| 1,0 | 0-25 | 140 | 20 | 158 | 65 | 2,5 | Add + |
| 2,0 | 0-45 | 225 | 30 | 235 | 90 | 8,5 | Add + |
| 3,0 | 0-45 | 225 | 30 | 238 | 90 | 9,0 | Add + |
| 4,0 | 0-50 | 250 | 30 | 257 | 115 | 15,5 | Add + |
| 6,0 | 0-50 | 250 | 30 | 260 | 130 | 17,5 | Add + |
Horizontal lifter, for stainless steel plates and constructions type STS-A RX-lift
• EN 13155
• usage: lift and transport stainless steel plates and structures in a horizontal position
• for safe transport, the gripper surface must be dry, clean and
non-greasy, free of any lubricant or dust
• Do not use on smooth, polished surfaces as they have various
lubricating compounds on them
• must clean the jaw of the gripper regularly in clean water, do not use solvents
• must check the handle before each use, make sure that it is
clean and undamaged, otherwise remove it from use
• EN 13155
• usage: lift and transport stainless steel plates and structures in a horizontal position
• for safe transport, the gripper surface must be dry, clean and
non-greasy, free of any lubricant or dust
• Do not use on smooth, polished surfaces as they have various
lubricating compounds on them
• must clean the jaw of the gripper regularly in clean water, do not use solvents
• must check the handle before each use, make sure that it is
clean and undamaged, otherwise remove it from use