| Capacity in pair (t) | Grip opening (mm) | A (mm) | B (mm) | D (mm) | E (mm) | Net weight (kg) | Add to Enquiry |
| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| 1,0 | 1-13 | 45 | 31 | 108 | 105 | 2 | Add + |
| 2,0 | 3-22 | 58 | 42 | 145 | 135 | 4,5 | Add + |
| 3,0 | 12-35 | 42 | 52 | 180 | 175 | 8,9 | Add + |
Horizontal plate clamp type JPD (LC) RX-lift
• EN 13155
• horizontal lifting and transport of thin steel plates, beam profiles and bending sheets
• reverse jaw enables transport of the sheets that tend to bend during lifting or manipulation of beam profiles (gripping on the side of the beam or profile flipping)
• use in pairs, multiple pairs or in “tripod” configuration in combination with 2-leg or 3-leg slings and suitable shackles
• it is prohibited to use in combination with 4-leg sling (when lifting long plates, use spreader beam with combination with 1-leg or 2-leg slings)
• for material with max. surface hardness 30 HRC
• temperature of use from -40 to 100°C
• lateral angle during lifting must not exceed angle of 15°
• rate capacity is calculated on basis of the top angle of 0-30° (for angels 30-60° between clamp and sling, clam capacity is decreased)
• EN 13155
• horizontal lifting and transport of thin steel plates, beam profiles and bending sheets
• reverse jaw enables transport of the sheets that tend to bend during lifting or manipulation of beam profiles (gripping on the side of the beam or profile flipping)
• use in pairs, multiple pairs or in “tripod” configuration in combination with 2-leg or 3-leg slings and suitable shackles
• it is prohibited to use in combination with 4-leg sling (when lifting long plates, use spreader beam with combination with 1-leg or 2-leg slings)
• for material with max. surface hardness 30 HRC
• temperature of use from -40 to 100°C
• lateral angle during lifting must not exceed angle of 15°
• rate capacity is calculated on basis of the top angle of 0-30° (for angels 30-60° between clamp and sling, clam capacity is decreased)