| Capacity (t) | Grip opening R (mm) | T (mm) | U (mm) | V (mm) | L (mm) | Net weight (kg) | Add to Enquiry |
| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| 1.0 | 0-22 | 124 | 295 | 50 | 54 | 3,6 | Add + |
| 2.0 | 0-30 | 154 | 385 | 54 | 56 | 5,5 | Add + |
| 3.0 | 0-40 | 180 | 400 | 60 | 72 | 10 | Add + |
| 5.0 | 0-50 | 222 | 483 | 68 | 76 | 17 | Add + |
| 8.0 | 0-60 | 265 | 535 | 65 | 90 | 26 | Add + |
Vertical plate clamp type JCD RX-lift
• EN 13155
• vertical lifting and transport of steel plate and construction (max. side angle 15°)
• safety lock mechanism
• in case of using more clamps, use them in combination with a spreader beam which will allow the use of clamps in vertical configurations
• min. capacity is 10% max. capacity
• for materials with a a surface hardness up to 30 HRC (285 HB)
• not suitable for lifting stainless steel and copper
• jaw opening from 0 to 60 mm
• temperature of use form -40 to 100°C
• EN 13155
• vertical lifting and transport of steel plate and construction (max. side angle 15°)
• safety lock mechanism
• in case of using more clamps, use them in combination with a spreader beam which will allow the use of clamps in vertical configurations
• min. capacity is 10% max. capacity
• for materials with a a surface hardness up to 30 HRC (285 HB)
• not suitable for lifting stainless steel and copper
• jaw opening from 0 to 60 mm
• temperature of use form -40 to 100°C