Horizontal lifter, for stainless steel plates and constructions type STS-A RX-lift
• EN 13155
• usage: lift and transport stainless steel plates and structures in a horizontal position
• for safe transport, the gripper surface must be dry, clean and
non-greasy, free of any lubricant or dust
• Do not use on smooth, polished surfaces as they have various
lubricating compounds on them
• must clean the jaw of the gripper regularly in clean water, do not use solvents
• must check the handle before each use, make sure that it is
clean and undamaged, otherwise remove it from use
Horizontal plate clamp type PPD RX-lift
• EN 13155
• horizontal lifting and transport of sheets and steel plates and constructions
• the clamp contains a safety lock mechanism that ensures that the load does not slip when is being lowered
• it is prohibited to use in combination with 2-leg, 3-leg or 4-leg sling (when lifting it is mandatory to use spreader beam with combination with 1-leg slings)
• for material with max. surface hardness 30 HRC
• temperature of use from -40 to 100°C
• lateral angle during lifting must not exceed angle of 15°
• rate capacity is calculated on basis of the top angle of 0-30° (for angels 30-60° between clamp and sling, clam capacity is decreased)