Hoists, clamps - Page 8 of 8

Showing 85–92 of 92 results

Universal plate clamp type IPU10 Crosby

• EN 13155 • vertical lifting and transport of the steel plates and construction • full 180° turning range for material transfer, turning or moving • safety lock mechanism • min. capacity is 10% max. capacity • for materials with a a surface hardness up to 37 HRC (450 HB) • jaw opening from 0 to 80 mm • temperature of use form -40 to 100°C • 10 year of warranty • manufacturers web page: https://www.thecrosbygroup.com/products/lifting-clamps/vertical/standard/crosby-ipu10-vertical-lifting-clamps/?language=en

Universal plate clamp type PCD RX-lift

Hoists, clamps, Clamps

• EN 13155 • vertical lifting and transport of the steel plates and construction • full 180° turning range for material transfer, turning or moving • safety lock mechanism • min. capacity is 10% max. capacity • for materials with a a surface hardness up to 30 HRC (285 HB) • not suitable for lifting stainless steel and copper • jaw opening from 0 to 80 mm • temperature of use form -40 to 100°C

Universal plate clamp type PCD-HRC50 RX-lift

Hoists, clamps, Clamps

• EN 13155 • vertical lifting and transport of the steel plates and construction • full 180° turning range for material transfer, turning or moving • safety lock mechanism • min. capacity is 10% max. capacity • for materials with a a surface hardness up to 50 HRC (490 HB) • for materials with high surface hardness (hardox 400, hardox 450, hardox 500) • jaw opening from 0 to 50 mm • temperature of use form -40 to 100°C

Select options

Vertical plate clamp for stainless steel type NMVC RX-lift

Hoists, clamps, Clamps

• EN 13155 • vertical lifting and transporting of plates, sheets and structures made of stainless steel, aluminum, wood, marble, stone and other materials whose surface can be damaged during lifting operations • safety mechanism • equipped with a chain lifting master link (shackle) for flexible manipulation and lifting • jaws (blocks) are made of anti-friction special synthetic material which ensures non-marking during lifting • for materials where is important to ensure non-marking (non-damage) of load surface • no minimal working load limit (WLL) • working temperature from -10 to 60°C

Select options

Vertical plate clamp type JCD RX-lift

Hoists, clamps, Clamps

• EN 13155 • vertical lifting and transport of steel plate and construction (max. side angle 15°) • safety lock mechanism • in case of using more clamps, use them in combination with a spreader beam which will allow the use of clamps in vertical configurations • min. capacity is 10% max. capacity • for materials with a a surface hardness up to 30 HRC (285 HB) • not suitable for lifting stainless steel and copper • jaw opening from 0 to 60 mm • temperature of use form -40 to 100°C

Vertical rail clamp type RC RX-lift

Hoists, clamps, Clamps

• EN 13155 • vertical lifting, transport and manipulation of rails • for rail sizes S49, S54, S60s, UIC60 • safety lock mechanism in close position • practical and simple operating • temperature of use form -20 do 100 °C

Select options